Instruction manual

Submasters
Page 128 Leap Frog 48/96 Operating Manual – Issue 3
Editing a Submaster with a Direct Chase
Editing a Chase Step
Press the SUBMASTERS key to display the Submasters Window. Select the submaster
with a direct chase to be edited, then press the LOAD key. The Load Options Window is
displayed on the monitor:
Select the required submaster number and step number, if different to the default numbers
displayed. Select the [OK] button to load the chase step into the programmer.
Adjust the levels of the dimmer channels as required using the preset faders. Adjust the
levels of the fixture parameters as required using the MFKs and control wheels.
Press the UPDATE key. The Update Options Window is displayed on the monitor. Set the
update options as required and then select the [OK] button to complete the edit.
Adding a Chase Step
Press the SUBMASTERS key to display the Submasters Window on the monitor. Select
the submaster with direct chase to be edited. Move the cursor to the Step field. Use the
+/- keys to select the step before the point at which you wish to insert a new step (eg to
insert a step after step 4, select step 4).
Press the INSERT key. A new unprogrammed step is added into the chase after the
selected step.
Set the levels of the dimmer channels using the preset faders. Set the levels of the fixture
parameters using the MFKs and control wheels.
Press the RECORD key to record the data into the new step of the chase. Any original
steps in the chase after the inserted step are renumbered accordingly.
Deleting a Chase Step
Press the SUBMASTERS key to display the Submasters Window on the monitor.
Select the submaster with direct chase to be edited. Move the cursor to the Step field.
Use the +/- keys to select the step to be deleted.
Press the DELETE key. A confirmation window is displayed. Confirm the step deletion.
Any original steps in the chase after the deleted step are renumbered accordingly.