Instruction manual

Submasters
Leap Frog 48/96 Operating Manual – Issue 3 Page 125
Programming Submasters
Programming a Scene Directly
Press the SUBMASTERS key to display the Submasters Window. Select the submaster
number to be programmed, if different to the one already selected - see Note below.
Set the levels of the dimmer channels using the preset faders.
Set the levels of the fixture parameters using the MFKs and control wheels.
Press the RECORD key.
• If the selected submaster is unprogrammed – All the tagged data in the programmer is
recorded into the selected submaster.
• If the selected submaster is programmed – A warning is displayed on the monitor and
Main LCD with the following options: [Overwrite Scene], [Turn into Chase] and
[Cancel]. Select the [Overwrite Scene] option. All the tagged data in the programmer
is recorded into the selected submaster, replacing the previous submaster data.
All dimmer and fixture parameters are untagged.
Note – Overwriting Submasters
If the selected submaster is already programmed – pressing the RECORD key twice, or
holding down the RECORD key for a second will overwrite the submaster.
Note – Recording a Full Scene
Holding down the SHIFT key and pressing the RECORD key will record all dimmers and
fixture parameters – a ‘full’ scene onto the submaster.
Note – Recording a Submaster if not on the Submasters Window
If the Submasters Window is not selected (active) and you press the RECORD key, the
Record popup window is displayed. Select the [Submaster] option, if not already selected,
enter the required submaster number in the field provided and click on the [OK] button.