Instruction manual

Submasters
Page 120 Leap Frog 48/96 Operating Manual – Issue 3
Submasters Window
Press the SUBMASTERS key to display the Submasters Window on the Main LCD and
monitor screen. The Submasters Window on the monitor shows the data for the
sumasters on the current page, as indicated by the seven segment display on the front
panel. Each line in the window displays the data for a single submaster, for example:
The various fields in the Submasters Window (monitor) are as follows:
No – The submaster number in the form “Page # – Submaster #” (eg 1-1). Submasters
with Scenes are suffixed with an ‘S’. Submasters with Chases are suffixed with a ‘C’.
Unprogrammed submasters are suffixed with a ‘*’.
Name – User defined name for the submaster (optional) or name of transferred memory or
range of transferred memories.
Step - The current step number – Direct Chase or transferred Chase memory only.
Fade Up – The Intensity fade up time for the submaster.
Fade Down – The Intensity fade down time for the submaster.
Colour Fade – The Colour fade time for the submaster. Note - the Colour Fade or
Beamshape Fade or Position Fade is displayed in the window to avoid cluttering up the
screen. Use the COLOUR, BEAMSHAPE or POSITION keys on the front panel to select
which of the fade times is displayed.
Comments – This field contains additional information on the submaster:
• Flash Button Action
• LTP Trigger Level
• Submaster Controls - if the submaster fader controls CBPE parameters.
• Transferred range of memories – the first, current, next and last memory numbers.
• Macro data – number of macro triggered by the submaster.
• Chase Modifiers - Direct Chase or transferred Chase memory only.