Instruction manual
Memories
Leap Frog 48/96 Operating Manual – Issue 3 Page 115
Playing Back Memories
The Playback X controls on the front panel together with the Memories Window on the
Main LCD and monitor are used to play back the programmed memories in the memory
stack.
Memories Window
The Memories Window on the Main LCD and monitor displays the Current and Next
memories on the memory stack. It is recommended that this window is on display when
playing back memories and must be on display if you wish to play back memories out of
sequence.
Selecting the Next Memory
When the GO key is pressed the Current and Next memories are incremented
automatically. Therefore to output the memories in the stack in numerical order, simply
press the GO key at the appropriate times.
To select a different memory to be output next – move the cursor to the Next memory
number field, then use the + and – keys or the UP and DOWN arrow keys to select the
next memory to be output. The Next memory to be output is highlighted by a yellow bar.
Alternatively, the Next memory may also be selected by moving the cursor to the No field,
pressing the ENTER key, entering the required memory number and pressing ENTER.
Starting the Show
Set the Playback X MASTER and GRAND MASTER faders to full. Ensure that Blackout is
not active. Set the OVERRIDE control to it’s central position.
Select the first programmed memory and press the GO key. The memory fades up on the
outputs according to it’s programmed fade and delay times.