Instruction manual

Memories
Page 112 Leap Frog 48/96 Operating Manual – Issue 3
Transferring Memories
The Leap Frog 48/96 desk provides the facility to transfer a single programmed memory or
a range of programmed memories onto a submaster.
Press the MEMORIES key to display the Memories Window on the Main LCD and monitor.
Select the single memory or the first memory in the range to be transferred. Hold down
the SHIFT key and press the COPY key. The Transfer Memory window is displayed on the
Main LCD and monitor:
The single memory transfer is the default option. The start and end memory numbers are
both set to the selected memory and the cursor is displayed in the Submaster field as
shown in the example above.
To Transfer a Single Memory
Use the + and – keys or the PAGE UP, PAGE DOWN and SUBMASTER FLASH keys to
select the submaster to transfer the memory to. Select the [OK] button.
If the selected submaster is unprogrammed – the memory is transferred to the submaster.
If the selected submaster is programmed – a warning message is displayed on the Main
LCD and monitor and you are given the option to overwrite the submaster or cancel the
transfer operation.
To Transfer a Range of Memories
Move the cursor to the [End Memory] field and use the +/- keys to adjust the end memory
number as required.
Move the cursor to the [Submaster] field. Use the + and – keys or the PAGE UP, PAGE
DOWN and SUBMASTER FLASH keys to select the submaster to transfer the range of
memories to. Select the [OK] button to complete the transfer operation.
If the selected submaster is unprogrammed – the range of memories is transferred to the
submaster.
If the selected submaster is programmed – a warning message is displayed on the Main
LCD and monitor and you are given the option to overwrite the submaster or cancel the
transfer operation.