Instruction manual

Memories
Leap Frog 48/96 Operating Manual – Issue 3 Page 111
Inserting Memories
The Leap Frog 48/96 desk provides the facility to insert up to a maximum of 99 point
memories between two whole number memories.
The point memories are referenced using decimal notation. For example, the point
memories that could be inserted between memory numbers 3 and 4 would be 3.01, 3.02
… 3.09, 3.1, 3.11, 3.12 … 3.19, 3.2, 3.21 … 3.29, 3.3 …. 3.9, 3.91, 3.92 … 3.99.
Memories are inserted one at a time and can only be inserted after a selected memory.
The desk displays the insert numbers available with a mid point one selected by default.
You can choose the default one or select one of the other available insert numbers.
Example 1: Memories 3 and 4 have been programmed. Select memory 3 and press the
INSERT key. The Memories screen displays insert memory numbers 3.1, 3.2, 3.3, 3.4, 3.5,
3.6, 3.7, 3.8 and 3.9 with 3.5 selected as the default. You can then set up dimmer and
fixture parameter values and program memory 3.5 or select one of the other insert options
and program that. Once the insert memory has been programmed, the Memories screen
only displays the programmed memories, ie 3, 3.5 and 4.
Example 2: Memories 3, 3.5 and 4 have been programmed. Select memory 3.5 and press
the INSERT key. The Memories screen displays insert memory numbers 3.6, 3.7, 3.8 and
3.9 with 3.7 selected as the default. You can then set up dimmer and fixture parameter
values and program memory 3.7 or select one of the other insert options and program that.
Once the insert memory has been programmed, the Memories screen only displays the
programmed memories, ie 3, 3.5, 3.7, 4.
Example 3: Memories 3 and 4 have been programmed. Select memory 3 and press the
INSERT key. The Memories screen displays insert memory numbers 3.1, 3.2, 3.3, 3.4, 3.5,
3.6, 3.7, 3.8 and 3.9 with 3.5 selected as the default. Press the INSERT key again. The
Memories screen displays insert memory numbers 3.51, 3.52, 3.53, 3.54, 3.55, 3.56, 3.57,
3.58 and 3.59 with 3.55 selected as the default.
Notes - Inserting Memories
A memory cannot be inserted in the following places:
• Between a whole number memory and its first insert (eg 2 and 2.01)
• Between two consecutive insert memories (eg 3.47 and 3.48).
• Between the last insert and the next whole number memory (eg 7.99 and 8)
If any of the above illegal inserts are attempted, an error message is displayed on the Main
LCD and monitor.