Instruction manual

Memories
Page 110 Leap Frog 48/96 Operating Manual – Issue 3
Editing a Chase Step
Press the MEMORIES key to display the Memories Window. Select the memory to be
edited, then press the LOAD key. The Load Options Window is displayed on the monitor:
Select the required memory number and step number, if different to the default numbers
displayed. Select the [OK] button to load the chase step into the programmer.
Adjust the levels of the dimmer channels as required using the preset faders. Adjust the
levels of the fixture parameters as required using the MFKs and control wheels.
Press the UPDATE key. The Update Options Window is displayed on the monitor. Set the
update options as required and then select the [OK] button to complete the edit.
Adding a Chase Step
Press the MEMORIES key to display the Memories Window on the monitor. Select the
chase memory to be edited. Move the cursor to the Step field. Use the +/- keys to select
the step before the point at which you wish to insert a new step (eg to insert a step after
step 4, select step 4).
Press the INSERT key. A new unprogrammed step is added into the chase after the
selected step.
Set the levels of the dimmer channels using the preset faders. Set the levels of the fixture
parameters using the MFKs and control wheels.
Press the RECORD key to record the data into the new step of the chase. Any original
steps in the chase after the inserted step are renumbered accordingly.
Deleting a Chase Step
Press the MEMORIES key to display the Memories Window on the monitor.
Select the chase memory to be edited. Move the cursor to the Step field. Use the +/- keys
to select the step to be deleted.
Press the DELETE key. A confirmation window is displayed. Confirm the step deletion.
Any original steps in the chase after the deleted step are renumbered accordingly.