Instruction manual

Memories
Page 108 Leap Frog 48/96 Operating Manual – Issue 3
Move the cursor to the Colour Fade field. The first and second finger control wheels adjust
the Colour Fade and Colour Delay times respectively.
Move the cursor to the Beamshape Fade field. The first and second finger control wheels
adjust the Beamshape Fade and Beamshape Delay times respectively.
Move the cursor to the Position Fade field. The first and second finger control wheels
adjust the Position Fade and Position Delay times respectively.
Adjusting Fade and Delay Times on the Memories Screen
Select the memory to be edited on the Memories screen (monitor).
Use the cursor keys or TIME key to move the cursor to the field to be edited (Fade Up,
Fade Down, Colour Fade etc..)
Press the ENTER key. The MFKs change to a numeric keypad.
Fade Time – Enter the required fade time and press the ENTER key.
Delay Time – Press the [DELAY] MFK. The LED in the key will light to show that the Delay
option has been selected. Enter the required delay time and press the ENTER key.
The fade or delay times may be entered in tenths of seconds, seconds only, seconds and
tenths or minutes, seconds and tenths as illustrated by the following examples:
0.5 ENTER 0.5 seconds
3 ENTER 3.0 seconds
7.5 ENTER 7.5 seconds
60 ENTER 1 minute
1.30.0 ENTER 1 minute 30 seconds
15.0.0 ENTER 15 minutes