Instruction manual

Memories
Page 100 Leap Frog 48/96 Operating Manual – Issue 3
Current and Next Memories
The Current Memory is highlighted with a green bar.
The Next Memory is highlighted with a yellow bar.
When the Current Memory = Next Memory, the memory is highlighted with a yellow bar.
Fade Progress Bar
The Fade Progress Bar shows graphically the progress through the fade into the current
memory. It is displayed in the memories window above the Information Bar.
Information Bar
The Information Bar is displayed at the bottom of the Memories Window and contains the
following information about the memory stack: Current Memory, Next Memory, Last
Programmed Memory, Timecode and Move on Dark information, for example:
Navigating the Memories Window
On the monitor, the cursor is indicated by a red background. The UP, DOWN, LEFT and
RIGHT arrow keys on the front panel (or external keyboard) are used to move the cursor
around the field in the Memories Window.
In addition to moving one field at a time using the arrow keys, it is also possible to jump
quickly to certain fields using the following shortcuts:
Press the MEMORIES key to move the cursor to the memory number (No) field for the
selected memory.
If the cursor is not in one of the fade fields – press the TIME key to move the cursor to the
Fade Up field.
If the cursor is in one of the fade fields – pressing the TIME key moves the cursor to the
next fade field (Fade Up  Fade Down  Colour Fade  Beamshape Fade  Position
Fade  Fade Up etc.)
Note – Memories Window – LTP Fade Fields
The Colour Fade or Beamshape Fade or Position Fade is displayed in the Memories
Window to avoid cluttering up the screen. Use the COLOUR, BEAMSHAPE or POSITION
keys on the front panel to select which fade time is displayed.