Operation Manual

General Maintenance
5.19
Turn Signal Light Bulb Replacement
1. Remove the turn signal lens screw (A) and remove the
lens.
2. Push in on the bulb, turn the bulb counterclockwise,
and the
n pull the bulb out.
3. Insert the new bulb into the socket, push in and turn
clockwise until it stop
s.
4. Install the lens and screw; tighten the screw. Do not
over-tight
en the screw.
Brake/Tail LED Replacement
The brake/tail LED (A) is not serviceable. Please contact
your Zero Motorcycle dealer for replacement.