Owner`s manual

General Maintenance

5.20

7. Unhook the headlight bulb spring clip (E) by pushing

down and to the side.

8. Lift up on the spring clip and remove the headlight bulb.

WARNING! Do n

ot touch the glass portion of the headlight

bulb. Keep the headlight bulb free of contaminants. Oil

from your fingers or contaminants will shorten the life of

the bulb. Thoroughly clean any fingerprints or

contaminants from the bulb using a clean cloth moistened

with alcohol.

9. Install the replacement headlight b

ulb into the lens.

10.Installation is the reverse of the removal procedure.

Turn Signal Light Bulb Replacement

To replace the signal light bulb:

1. Remove the turn signal lens screw (A) and remove the

lens.

2. Push in on the bulb, turn the bulb counter-clockwise,

and then pull the bulb out.

3. Insert the new bulb into the socket, push in and turn

clockwise until it stop

4. Install the lens and screw; tighten the screw. Do not

er-tighten the screw.