Owner`s manual

Starting and Operating
4.2
Unpacking Your Zero Motorcycle
Although unpacking your Zero Motorcycle can be done by
a single person, it is recommended to have a second
person to help lift and remove your motorcycle from the
crate base.
Outer Box Cover
 Cu
t and remove the two outer box retention straps.
 Un
screw stabilizer bar bolts, one on each side of outer
box.
 Open
box top and remove inner cardboard end
reinforcement sleeves.
 Un
screw stabilizer bar from handlebar end and remove.
 Un
screw lower crate cover retaining screws and
washers.
 L
ift or cut outer box away from motorcycle.
Inner Assembly
 Carefully remove plastic cover
from motorcycle.
 L
ocate small parts box below motorcycle and put to the
side. (This box contains important documentation,
owner’s manual, keys, etc.).
 Re
move the power pack rail.
 Remove the power pack.
 Care
fully lift rear portion of the motorcycle over the
swingarm standoff and off crate base.
 Care
fully lift front wheel out of crate base.
 Dep
loy kickstand, lean motorcycle and inspect in
accordance with delivery inspection sheet.
Recycling
Your Zero Motorcycles shipping crate and p
ackaging
materials were designed to be completely recycled. Please
cut down and recycle all cardboard, plastic, and wood
materials in appropriate receptacles.
The tie down straps that accompanied your motorcycle
can be reused as regular tie down straps.