Operation Manual

Controls and Components
3.9
A. Adjust Button (ADJ)
See
“Dash Settings”, on page 3-12.
B. Select Button (SEL)
See
“Dash Settings”, on page 3-12.
C. Cha
rge Indicator
This indicator and readout displays the amount of
energy remaining in the power pack, similar to the fuel
gauge on a gasoline powered vehicle.
D. Remain
ing Charge Time Indicator
This area displays the amount of time left for the
power pack to reach full charge.
E. Clock
The clock displays time in standard (AM/PM) or 24
ho
ur mode.See
“Setting the Clock”, on page 3-13
F. Speedometer
The speedometer is a digital display in either
kil
ometers per hour (km/h) or miles per hour (mph).
See
“Unit Display - Speed”, on page 3-14
G. Odometer
The odometer displays the total distance the
motorcycle has
been ridden in kilometers or miles.
H. Per
formance Modes
This area displays which performance riding mode
(ECO, SPORT, a
nd CUSTOM) has been selected by
the rider using the performance level mode button
located on the right handlebar control assembly. See
“Performance Level Mode Button”, on page 3-19
I. Output Meter
The OUT
PUT meter indicates the amount of Torque
applied to the rear wheel and the Power (energy)
being used while riding.
J. Re
gen Meter
The regenerative (REGEN)
meter indicates the
amount of Torque on the rear wheel and the Power
(energy) feeding back into the battery of the
motorcycle during the regenerative braking process.
K. Display
s A&B
Displays A&B can be customized
to display functions
which include Trip odometers, Range, Errors, RPM,
Trip Average, Lifetime Average, and Temperature. All
are accessible by using the ADJ and SEL buttons.
See
“Dash Settings”, on page 3-12.
L. Blu
etooth® Indicator
This indicator displays when an active Bluetooth®
equipped smartphone is paired with the motorcycle.
For Pairing instructions, see
“Bluetooth® Pairing”, on
page 3-15