Operating instructions

Page 5
SELECTING A CHIMNEY INSTALLATION AND LOCATION
There are two basic types of chimney installation possible with the 80ZC; straight up through a ceiling or
a chase installation, either outside or inside. These are normally used as follows:
CHIMNEY CAP
STORM COLLAR
FLASHING
CHIMNEY PIPE
METAL FIRE STOP
METAL FIRE STOP
Z.C. CABINET
CHIMNEY CAP
STORM COLLAR
FLASHING
METAL FIRE STOP
Z.C. CABINET
CHIMNEY PIPE
CHIMNEY CAP
STORM COLLAR
FLASHING
CHIMNEY PIPE
ADJUSTABLE
CHIMNEY
ELBOWS
METAL FIRE STOP
Z.C. CABINET
FIGURE 1 THROUGH CEILING
FIGURE 2 THROUGH CATHEDRAL CEILING
FIGURE 3 OFFSET TO CLEAR OBSTRUCTION
CAUTION: Refer to chimney
manufacturer’s instructions for assembly
and disassembly of chimney parts. Be
sure to follow chimney instructions for
proper clearances to combustibles and
proper air spacing required.
WARNING: Only one pair of 15
degree or 30 degree offsets can be used.