Full Product Manual

4 5
ZEROWATER
®
FILTER WATER JUG COMPONENTS
ZEROWATER USE AND CARE INSTRUCTIONS
INSTRUCTIONS BEFORE INSTALLING CARTRIDGE AND FIRST USE
Clean all plastic components and filter cartridges by washing and rinsing
thoroughly with warm water only. These products are not dishwasher safe.
Discard all plastic bags, as this may be a suffocation hazard to young children.
ASSEMBLY INSTRUCTIONS
2. Place the lower chamber on top of
your cooler with the float valve fitting
inside the cooler’s reservoir. Ensure the
lower chamber is level on the cooler base.
Lid
Upper Chamber
Lower Chamber
Divider Rim
Filter Adapter
(not shown)
Maximum
Water Level
Filter Cartridge
Lower Chamber
Float Valve
with Soft Washer
and Nut
Continued on next page ›
1. Remove the nut (included) with the float
valve. Place the nut into the recessed area
(inside the lower chamber). Thread the
float valve tightly through the bottom of the
lower chamber. Ensure the rubber gasket
is positioned between the float valve and
bottom of the lower chamber. Do not prop
the Filter Bottle on the float valve once
assembled, as it is fragile and will break.
3. Place the lower chamber divider
rim firmly on the top. The rippled part
of the white rim should overlap the
lower chamber. If assembled upside
down, there will be leakage. Be sure its
seated properly on the lower chamber.