User's Manual

V0.1.32 Draft version, for evaluation sample only

6. Done! The print server will restart.

7. Switch the DIP back to normal mode and change your wireless adapter setting.

Reset Button

Reboot the Print server:

1. Verify the power of print server is turned on.

2. Press the reset button once.

WARNING: This will restart the print server and stop all on-going and pending

print jobs!

Perform a Factory Default:

1. Disconnect the external power adapter.

2. Hold down the reset button.

3. Reconnect the external reset button. Wait about 5 seconds.

4. Release the reset button.

5. The print server will restart.