User's Manual

V0.2.32 Draft version, for evaluation sample only.

Appendix:

Diagnostic Mode (Wireless)

If you have no the twisted-pair cable to configure print server and have problems to configure

it on wireless network. Please refer to the following steps:

1. Change the print server to diagnostic mode by switching the DIP switch to DIAG mode.

2. Change your wireless adapter to 802.11b Ad-hoc mode, and the ESSID: WLAN-PS;

Channel: 6

3. Run PSAdmin to discover the print server.

4. Select the wireless print server

5. Select wireless and input the ESSID, Channel, Rates that meet your network

environment, then press ok.