User Manual

Broadband DSL/Cable Wireless Router User’s Manual
61
Wireless Advanced Configuration
Please follow these steps to setup.
1. Click Wireless Setup in the left-column. It then
appears the sub-menus.
2. Click Advanced Settings, and then it will appear a
picture as below.
3. Beacon Interval: Default is 100 msec.
4. RTS Threshold: Packet size.
5. Fragmentation: Packet size.
6. Preamble: You could select “Long” or “Short”.
7. DTIM Interval, CFP Period, and CFP Max Duration:
You could use the default value.
8. Authentication Type: You could select “Open system”
or “Share Key”.
9. Access Point TX Rate: Transmit speed.
10. Done.