User Manual

Broadband DSL/Cable Wireless Router User’s Manual

Preparation: Connecting to the Broadband

DSL/Cable Wireless Router

In order to proceed with the advanced configuration of the

Broadband DSL/Cable Wireless Router, you need to have

completed the Broadband DSL/Cable Wireless Router

basic setup detailed in Chapter 3.

1. Open the web browser in your Windows 95/98/Me

or Windows NT/2000 computer.

2. Type the default IP address (192.168.1.1) in the

Location box and press Enter.

3. It then shows an authentication dialog for the

Broadband DSL/Cable Wireless Router. Type the

default administration user name, admin, and type

the default configuration password 0000, click the

OK button as shown in following figure.

4. You then enter the Home Page of the device.

5. The preparation is now completed.