User Manual

Broadband DSL/Cable Wireless Router User’s Manual

Loading the Default Values

If you make any errors while configuring the Broadband

DSL/Cable Wireless Router, or if you wish to reset the

Broadband DSL/Cable Wireless Router to default settings,

please follow the steps below. This procedure will reset the

settings to factory defaults.

1. On the desktop, open your web browser.

2. Type the default IP address (192.168.1.1) in the

Location box and press Enter.

3. The authentication dialog for the Broadband

DSL/Cable Wireless Router will then appear.

Type the default administration user name,

admin, and the default configuration password

0000 and click OK as shown in following figure.

4. Click the Set Factory Defaults button in the left-

hand column.