User Manual

Broadband DSL/Cable Wireless Router User’s Manual
31
Setting Date and Time
One function of Broadband DSL/Cable Wireless Router is
that it allows you to set the initial time when you install the
device. This enables the time of any hacker activity in your
network to be recorded. To setup this function, follow the
procedure below:
1. Click the Administrator Setup button in the left-
hand column, and then choose “Date & Time”.
2. Select your time zone.
3. Type “Time” and “Date”.
4. Choose “SNTP Active” or not.
5. Click “Save” and then click “Apply”.
6. The setup is now completed.