User Manual

Broadband DSL/Cable Wireless Router User’s Manual

Configuring Windows 95/98/Me or

Windows NT/2000 (DHCP-capable)

Computers

Each PC that supports DHCP and is located on your LAN

must be configured so it can communicate with the

Broadband DSL/Cable Wireless Router. Follow these steps

to configure the reset of the PCs on your LAN.

(If you want to manually specify an IP address and related

settings for the computers, please see the Selecting an IP

Address section later in this chapter).

Note: The steps described in this section are for TCP/IP-

capable operating systems like Windows 95/98/Me

or Windows NT/2000. For non-TCP/IP systems like

DOS/Windows 3.x, please see the Configuring

Non-DHCP Computers section later in this chapter.

1. From your Windows 95/98/Me or Windows

NT/2000 desktop, click Start, point to Settings,

and select Control Panel.