User Manual

Broadband DSL/Cable Wireless Router User’s Manual

Power On Self Test (POST)

The Broadband DSL/Cable Wireless Router automatically

performs a Power On Self Test (POST) when powered on.

Successful powering up of the Broadband DSL/Cable

Wireless Router is indicated by five flashes of the red LED

marked Status on the topside of the Broadband DSL/Cable

Wireless Router. If the Red LED does not flash five times,

please contact your dealer for repair or replacement.

Resetting the Wireless Router

The Broadband DSL/Cable Wireless Router has a reset

button in the rear panel of the device. In some circumstances

you may need to reset the Broadband DSL/Cable Wireless

Router. Please follow the instructions below to reset the

Broadband DSL/Cable Wireless Router.

1. With the Broadband DSL/Cable Wireless Router

powered on, press the reset button once. The red

LED light that is marked as Status will then flash

once.

2. Reset the DSL/Cable modem.