User Manual

Broadband DSL/Cable Wireless Router User’s Manual

Broadband Wireless Router Embedded

4-port 10/100Mbps Switch

The Broadband DSL/Cable Wireless Router with embedded

4-port 10/100Mbps Switch features auto-negotiation switch

ports and provides the flexibility to fit into your operational

space and network environment.

This device is built with plug & play, auto-negotiation supports

all ports, half & full-duplex multi-selection, and a store and

forward transmission scheme.

The Broadband DSL/Cable Wireless Router requires the

following network hardware:

¨ UTP cable (Cat.5 Twisted-pair), 10Base-T or

100Base-TX Fast Ethernet.

Note: Prepare twisted-pair cables with RJ-45 plugs. Use

Cat.5 cable for all connections. Make sure the length

of each cable does not exceed 328 feet

(approximately 100 meters).