User Manual

Network Print Monitor
6 - 10
e. The Configure Print server dialog box will
appear as shown in the following picture.
f. (Optional) In the Device Name option, type a
name for identification purpose.
g. Enable the print server’ s DHCP function, if
there is a DHCP server on your network. This
option allows the print server to obtain
IP-related settings automatically from your
DHCP server. This setting, by default, is
disabled. If you would like to manually specify
an IP address to the device, please skip to the
following step.
h. In the IP Address option, type an IP address
for the print server. The IP address must meet
the IP addressing requirements of the network
segment.
i. (Optional) In the Subnet Mask option, type the
Subnet Mask your LAN or network segment is
currently configured to use.