User Manual

Network Print Monitor
6 - 8
the back of the print server unit). Select one of the
print server’ s ports from the list.
n If the IPX/SPX protocol is not installed, no print server
will be shown in the display box. Then please select
TCP/IP or NetBEUI alternatively.
n It starts again to search for the print server on the
network by using the protocol you specify in the step
above. When finished, the print server will be displayed
along with the its Node ID, as shown in the following
picture. (The last 6 digits of the Node ID, located on
the back of the print server unit). Select one of the
print server’ s ports from the list.