User Manual

Network Print Monitor
6 - 5
Win 95/98/Me Installation Procedure
Please perform the steps as follows to ensure a smooth
installation:
1. Run Setup from the print server’ s NetWare, Win
95/98/Me/NT/2000 Setup diskette
2. The Network Print Monitor for Windows 95/98/Me
Setup will then appear. Click Next.
3. A message reading, “ Setup is complete. You may add
the Network Print Port by using the PSAdmin” will
appear. Click OK.
4. Click Start, point to Settings, and select Printers.
5. Double-click the Add Printer icon.
6. Select Local Printer and click Next.
7. Select the appropriate printer manufacturer and printer
type and click Next.
8. Select LPT1 and click Next.
9. Type in the Printer Name and click Next.
10. A message reading, “ After your printer is installed,
Windows can print a test page so you can confirm that