User Manual

Network Print Monitor
6 - 2
TCP/IP Protocol Installation
1. Click Start, point to Settings and select Control
Panel.
2. Double click the Network icon.
3. If the TCP/IP Protocol is not already installed, click
Add.
4. Select Protocol and click Add.
5. Select Microsoft from the Manufacturers list.
6. Select TCP/IP Protocol from the Network Protocols
list.
7. Specify an IP address, Subnet Mask, and Gateway
address or specific “ Obtain IP address automatically” ,
if a DHCP server is available on the LAN.
8. Restart the computer.
9. Done.
Note: Using TCP/IP protocol to access the print server
requires well-configured TCP/IP settings. If you are
not familiar with these settings, please consult your
network administrator for details or ask for help.