User Manual

Configuration from Embedded Web Server
5 - 30
least an AppleTalk Zone exists on the network. If no any
zone exists, the print server itself displays the zone name
as an asterisk (*) in the current AppleTalk Status of the
print server in the web browser.
4. Port Name: In this option, type a name for identification
purpose or just leave it in default (recommended).
Note: The default print server’ s Chooser name is as shown
as follows:
<ATALK_PS>-xxxxxx-1, where xxxxxx represents
the last six digits of the device’ s Node ID. For example:
ATALK_PS-40EEED-1. You may also change the
<ATALK_PS> to a name you like for identification
purpose in this option. The print server will append the last
six digits to the name you specify.
5. Printer Type: In this option, the LaserWriter of printer
type by default (recommended).
6. Data Format: In this option, data format includes ASCII,
TBCP and BCP.