User Manual

Configuration from Embedded Web Server
5 - 23
TCP/IP Setup
1. Click Setup, it then appears the sub-menu.
2. Click TCP/IP, it then as shown in the following picture.
DHCP/BOOTP: This option allows you to select DHCP/
BOOTP option. If there is a DHCP/BOOTP
server on your network. This option allows
the print server to obtain IP-related settings
automatically from your DHCP server.
IP Address: This option allows you to input IP address from
the print server. The IP address must meet the
IP addressing requirements of the network
segment.