User Manual

Configuration from Embedded Web Server
5 - 10
TCP/IP Status
1. Click Status, it then appears the sub-menu.
2. Click TCP/IP, it then as shown in the following picture.
Use DHCP/BOOTP: This option allows you to view DHCP/
BOOTP status. If there is a
DHCP/BOOTP server on your network,
this option allows the print server to obtain
IP-related settings automatically from
your DHCP server.
IP Address: This option allows you to view IP address from
the print server. The IP address must meet the
IP addressing requirements of the network
segment.