User Manual

Troubleshooting
9 - 6
Moving the print server to A New Segment
If the print server is moved from one network segment to
another after the initial installation, through the Network Print
Port, the print server must be reconfigured on the original
Windows NT server or on each Windows 95/98 computer
using this print server in order for the print server’ s driver on
each computer to re-establish a new connection.
Print Server Reconfiguration Procedure on
Windows 95/98/Me
1. Click Start on the bottom left hand corner of the
screen.
2. Select Settings and select Printers.
3. Select your printer connected to the print server, and
right-click the printer icon. Select Properties.
4. Click Details tab.
5. Click Port Settings as shown in the picture below. The
print server will be displayed on the next print server’ s
configuration screen.
Find your original print server according to its Port Name or
other distinguished name and click this print server.