Instruction manual

INSTRUCTION MANUAL - Issue 1 - 07/2014 | 41
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk
12.0 – BATTERY STATS RESET
When replacing the batteries in a device, it is important to reset the devices’ battery stats. This will ensure that the
new battery level is reported accurately. Failure to reset the battery stats could result in false low battery faults
being shown on the panel. The reset process does not require any use of the control panel and can be done before
or after logging a device on. With the device powered o ; while holding both the reset button and the unit
removal button, move the jumper link to the ON position. Keep holding both buttons down for approximately 10
seconds until the second set of beeps is heard, then release the buttons.