Instruction manual

INSTRUCTION MANUAL - Issue 1 - 07/2014 | 40
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk
View Transmissions in the Airwaves – service and commissioning users
1.Main Menu>>6.View Airwaves
In order to see any transmissions that occur in the airwaves, a menu option is available. This is particularly useful to
see that the receiver of the panel is operational. Only Zerio Plus devices will be displayed on this screen.
(Millennium, Zerio and ‘A series’ devices use a di erent frequency and transmission protocol; therefore will not be
visible). The screen only displays information for the last received transmission. If another message is received the
previous one is overwritten. The displayed transmissions can be  ltered using the following options.
View All: Displays every signal received on current RF channel.
View This System: Only messages from devices that have been previously programmed on to this
system will be listed.
View Single Device: Only messages from a speci c, chosen device on the system are listed.
View Type: Select the device type using the cursor keys. Only messages received for that type
on the system are listed.
11.0 - VIEW AIRWAVES