Instruction manual

INSTRUCTION MANUAL - Issue 1 - 07/2014 | 24
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk
6.18 - Panel Text – commissioning users
1.Main Menu>>1.Setup>>4.System Setup>>3.Edit Panel>>3.Panel Text
This menu allows the user to set a name and/or location for the panel.
This will be displayed on the system normal screen. Enter text using the
panel keys or by connecting a standard USB keyboard.
6.19 - SIM Operations – commissioning users
1.Main Menu>>1.Setup>>4.System Setup>>3.Edit Panel>>4.SIM Operations
The memory card should be  tted at all times. It stores a complete set
of the system settings including text and options. If ‘Load from SIM’ is
selected, all panel settings will be overwritten with the settings stored on
the memory card. This can be useful when replacing a panel. ‘Save to SIM’
will save all the current panel settings to the memory card.
6.20 - Device Assignment – commissioning users
1.Main Menu>>1.Setup>>4.System Setup>>4.Device Assignment
Devices on the system are assigned to communicate with the antenna on
the main panel by default, so if any radio booster panels or
additional antennas have been added it is important that each device is
reassigned to the panel or wired antenna with the best signal strength.
The ‘1-Auto Assign’ option will automatically assign each device to the
panel or antenna it receives the strongest signal from. This can be done for one device or for all devices at once. Be
sure to clear the verify table  rst and wait 15 minutes before running the auto assignment. The process will take 20
seconds per device.
‘2-Assign Device’ will allow the user to manually assign any device on the system to any panel or antenna. Devices
should be deassigned before assigning to an antenna. ‘3-Deassign Device’ will deassign the selected device from a
speci c antenna. ‘4-Deassign All’ will deassign all devices from a speci c antenna.
6.21 - Panel Assignment – commissioning users
1.Main Menu>>1.Setup>>4.System Setup>>4.Device Assignment>>5.Panel Assignment
When a control panel has multiple antennas connected (via the SMA connector and the RS-485 connectors),
any repeater panels will be assigned to communicate with the control panel stub antenna by default. ‘1-Assign
Panel’ allows the user to assign any repeater panel to a particular antenna connected to the main panel. Selecting
‘2-Deassign Panel’ will remove a speci ed link.
When a repeater panel has multiple antennas connected, any other panels will be assigned to communicate with
the repeater panel stub antenna by default. By attaching the control panel display board to the repeater panel and
using the options in the panel assignment menu, any other panel can be assigned to a particular antenna
connected to the repeater panel.