Instruction manual

INSTRUCTION MANUAL - Issue 1 - 07/2014 | 15
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk
6.1 - Changing the system Time and Date – all access levels
1.Main Menu>>1.Setup>>1.Time & Date
To change the time and date settings use the and keys to
navigate to the value, and the or keys to select the desired value.
Press Enter to accept or Cancel to exit. The Zerio Plus panel automatically
adjusts the clock for daylight savings. Should complete power be lost the
panel will revert the time back to the default of 01/01/2013 12:00:00
6.2 - View Access Codes – advanced, service and commissioning us-
ers
1.Main Menu>>1.Setup>>2.Access Codes>>1.View Codes
The access code is a 4 digit number; with each digit ranging from 1 to
4. Selecting ‘1-View Codes’ will display the screen opposite. Only access
codes for the access level you have entered and those below it will be
displayed.
Changing Access Codes – advanced, service and commissioning
users
1.Main Menu>>1.Setup>>2.Access Codes>>2.Change Codes
Using the cursor keys select the access level for which the access code is
to be changed. Users can only change the access code for their level and
below. Once selected, press the key to continue. Using the numbered
keys enter the current access code. If correct, you will be prompted to
enter your chosen new access code, then to re-enter it to con rm. Press
Enter to save the new access code, a message will be displayed that the
access code is being saved. Press Cancel to exit without saving at any
time.
Set Access Codes to Default – commissioning users
1.Main Menu>>1.Setup>>2.Access Codes>>3.Set to Default
Use this option to reset the user access codes to their default settings.
Press Enter to con rm.
6.3 - Default Access Codes
Basic User (AL2A): 1111
Advanced User (AL2B): 2222
Service Engineer (AL3A): 3333
Commissioning Engineer (AL3B): 4444
6.0 - SETUP MENU
Ensure that the access codes
AL3A & AL3B are changed from
the default settings to ensure
that only authorised personnel
can make changes to the system