User manual

EDA-Z5008, Z5020 & Z5100 – User Manual ZPControlUserMan_r100

_____________________________________________________________________________________________________

1.0 - Front Panel Layout

① Fire LEDs If the panel goes into alarm, these LEDs will flash until the panel is reset.

② Zone Alarm LEDs In a fire condition, the appropriate zone LED will illuminate. If the fire

condition exists across multiple zones, multiple zone LEDs will be

illuminated. The zone LEDs will remain lit until the panel is reset. *The

EDA-Z5008 8 Zone panel is shown. The EDA-Z5020 panel is equipped with

20 zone LEDs and the EDA-Z5100 is equipped with 100 zone LEDs.

③ Status LEDs

Supply This LED will be illuminated when mains power is present.

Delays Active Illuminated if delays are enabled.

Disablements Illuminated for any disablement.

Test Mode Illuminated if any test modes are operational.

More Info More information on the system condition is available in the event log.

Example image

① ②

③ ④

⑤ ⑥