Operation Manual

6
4. CHARGING
Rest the device on the charging unit, (note: always make sure that the device is
turned off). The indicator light will keep on flashing during the charging
process. Once the charging is finished, the light will stay on. It takes 14-16
hours to fully charge the batteries before the first use. When the device is totally
discharged, approximately 12-14 hours’ charging is required for the battery to
regain full capacity. In order to ensure that it is always ready for use, the device
should be left on charger when not in use. The adaptor may become warm during
charging, this is normal.
The Charger PWC-400-054 and Battery (12V 1800mAh) PWC-400-043
are available individually should they need to be replaced. Contact
your local Zepter Service Centre.