Operation Manual

9
6. MAINTENANCE
Cleaning the Rolling Brush
If the Rolling Brush (5) becomes blocked or jammed for any reason, the vacuum
power will be reduced. The Rolling Brush may then need to be cleaned. First turn
off the device, and then carefully use a pair of scissors or a sharp knife to remove any
items such as threads that may have become entangled.
If the Rolling Brush needs to be lifted out – open the hatch cover by turning the
locking screw anti-clockwise with a screwdriver or other tool. The hatch cover will
come slightly free and can now be removed.
Lift out the roller brush and clean it. Replace the Rolling Brush and make sure that
it fits into its guiding tracks, and make sure that it can spin freely.
Replace the hatch cover and lock by turning clockwise as far as possible.
Cleaning of wheel axles
If a wheel is jammed by threads or dirt: remove the wheels by carefully loosening
them with a screwdriver inserted into the cavity. Remove threads or any other
objects that may have become jammed in the wheels’ axles. Reassemble the wheels
by pressing them tightly together.