© COPYRIGHT HOME ART & SALES SERVICES AG - ZEPTER GROUP - PMD-HC42-09-EN - Art Work: BRID MARKETING - ITALY WARRANTY CARD PWC-400 INSTRUCTIONS FOR USE PWC-400
1 WARRANTY CARD (12 months): TURBO HANDY 2 in 1 2 DATE OF PURCHASE: 3 SERIAL NO.: 4 STAMP AND SIGNATURE OF RETAILER: 5 NAME AND ADDRESS OF PURCHASER: 6 FAULT/DEFECT: 7 This warranty card has to be sent to the retailer, together with the defective device and the receipt as proof of purchase.
INDEX 1. OVERVIEW page 03 2. IMPORTANT SAFETY NOTICE page 04 3. GETTING STARTED page 05 4. CHARGING page 06 5. FUNCTIONS page 07 6. MAINTENANCE page 08 7. TECHNICAL SPECIFICATION page 10 8. DISPOSAL page 10 9. WARRANTY STATEMENT page 11 10.
2.1 1A 4.1 2 4.2 2.3 2.2 2.4 5 2.5 1B 3 4 6 7 6.1 8 2.
1. OVERVIEW 1A TURBO POWER UNIT switch 1B HANDY UNIT switch 2 TURBO POWER UNIT 2.1 Upper handle 2.2 Handle foldable axis 2.3 Handle folding button 2.4 Release button 2.5 Main body 2.6 Electrical TURBO BRUSH 3 HANDY UNIT 4 FILTER UNIT 4.1: Washable filter 4.2: Filter baffle 5 TURBO BRUSH assembly with Rolling Brush 6 CHARGING BASE 6.
2. IMPORTANT SAFETY NOTICE • The device is only authorised for private, domestic use! • Do not leave the device unsupervised when the charging plug is connected. • The devices is not a toy, therefore please be particularly careful when children are around. • Check the device and connections regularly for visible damage. The device must not be used if the housing is damaged or other damage is present. • Never attempt to open the device or the mains adapter yourself or to replace the connecting cable.
3. GETTING STARTED Unpacking and assembly Check that all the parts are in the box. Parts breakdown: see chapter 1. OVERVIEW. 1 Extend the handle by unfolding it. You can store it easily and save space by folding the handle. Assemble the charging unit firmly. ➡ 2 Fit the Electrical Turbo Brush by carefully inserting it into the vacuum compartment. 3 Position the charging station close to a mains socket (well away from heat sources or wet places).
4. CHARGING Rest the device on the charging unit, (note: always make sure that the device is turned off ). The indicator light will keep on flashing during the charging process. Once the charging is finished, the light will stay on. It takes 14-16 hours to fully charge the batteries before the first use. When the device is totally discharged, approximately 12-14 hours’ charging is required for the battery to regain full capacity.
5. FUNCTIONS Cleaning your floor and carpet has never been so handy! TURBOhandy 2in1 is your new incredibly practical dual appliance to brush and vacuum every corner of your home. Cordless and rechargeable, this handy device splits in two: the Turbo power unit, a bigger unit for floor and carpets and the Handy unit for crumbs and dust. 5.1 Vacuuming floors and carpets with the TURBO POWER UNIT Despite its light appearance the TURBOhandy 2in1 has got great power through its electrical Turbo Brush.
6. MAINTENANCE Emptying/cleaning Careful cleaning of the dust container and filters. 1 Remove the whole dust container by pressing the release button and twisting the dust container off. ➥ ➥ ➡ 2 Pulling out the filter unit (4) and emptying the contents of the dust container into a suitable vessel or bag. (The filter can be shaken clean or cleaned and rinsed using warm water. Make sure that the parts are dry before they are reassembled). 3 Reassemble the components.
Cleaning the Rolling Brush If the Rolling Brush (5) becomes blocked or jammed for any reason, the vacuum power will be reduced. The Rolling Brush may then need to be cleaned. First turn off the device, and then carefully use a pair of scissors or a sharp knife to remove any items such as threads that may have become entangled. If the Rolling Brush needs to be lifted out – open the hatch cover by turning the locking screw anti-clockwise with a screwdriver or other tool.
7. TECHNICAL SPECIFICATION ADAPTOR INPUT: 230-240V~ 50Hz ADAPTOR OUTPUT: 15.6V DC 400mA NET WEIGHT: 3.4 kg SIZES: 113.50 X 16.00 X 27.00 (CM) PRODUCT CODE: PWC - 400 8. DISPOSAL In accordance with art. 13 of Legislative Decree no.
9. WARRANTY STATEMENT This appliance can only be assigned to the functions it has been designed for, i.e. house cleaning and air enhancement. Zepter International cannot be held responsible for any damage deriving from improper, incorrect or unreasonable use. All our appliances have undergone strict inspection tests and are guaranteed against manufacturing defects. The guarantee starts from the date of purchase.
10. TROUBLESHOOTING ISSUES Vacuum will not operate. Electrical Turbo Brush will not operate. POSSIBLE CAUSES SOLUTIONS Batteries are discharged. Charge vacuum on Charger Base. Dead battery (won’t hold charge). Replace battery (call your Zepter Service Centre for info). Contacts between Vacuum and Charging Base are dirty. Clean contacts off with damp cloth. Be sure to dry contacts completely before use. No power coming through electrical outlet.
