Use and Care Manual

14
www.zephyronline.com
Maintenance – Light Bulbs
REPLACING LIGHT BULBS
CAUTION: Light bulb becomes extremely hot when turned on.
DO NOT touch bulb until switched o󰀨 and cooled. Touching hot bulbs could cause serious burns.
Make sure all power is turned o󰀨 and bulbs are not hot.
Access light bulb by removing light bulb lens cover by 1 screw. FIG. B
Remove by turning bulb counter clockwise. Note: Bulb does not unscrew; it turns 60 degrees,
stops and falls out.
Replacement bulbs are available from Zephyr or specialty lighting stores. See page 17 for ordering information.
ZSI-E30AS-ES & ZSI-E36AS-ES: Purchase type: 13w Fluorescent GU-24, STS T3 13GUS
FIG. B