Instructions

Decalcification must be done correctly to prevent damage. So it is essential
to follow these instructions.
Important:
– Never clean the machine with vinegar. This causes damage and
makes your coffee taste bad
– Damage caused by incorrect decalcification or failure to decalcify is
not covered by the guarantee
– Caution: beware of hot water!
1. Recommendations: purchase commercially available decalcifier
(decalcifying liquid), diluted according to the manufacturer‘s instructions;
pour the mixture in the water tank
2. Make sure there is without capsule inside the machine.
3. Place a large bowl under the dispensing head to collect the decalcification diluted and lime residues
4. Fill the water tank with water to maximum level mixed with decalcifying solution, make sure the solution is dissolved completely.
5. Press the lungo button to run decalcifying water as you brew coffee normally, repeat for several times to run out the entire tank water.
6. Repeat the process to run another tanks of water mixed with decalcifying solution.
7. Repeat the process to Flush out the intern circuit with a tank of fresh water (without the decalcifying solution) to clean the internal circuit
completely.
PROBLEM
CAUSE
SOLUTION
No coffee is brewed.
The water tank is empty.
Fill water in the water tank.
The coffee is not hot
enough.
-the Cold cups / mugs.
- Scale build-up in machine.
- Cold machine.
Preheat cup / mug.
- Descale.
- For cold machine, brewing a cup of water to warm up the
circuit.
Water on table
- Water tank is leaking.
- - drip tray is full of water.
- Check if the valve on water tank is stuck.
- - empty the drip tray.
Handle can not close
- the brewing basket is not
placed well
-Push the brewing basket into correct position