Instructions

Safety precautions
Please take time to read these safety precautions carefully before connecting your machine to the power supply. It is essential to follow them and the operating instructions.
− First read this entire operating manual.
− Danger of electric shock! Never immerse the machine in water or any other liquid.
– Connect only to a properly grounded power point.
– To make sure that the machine is switched off, remove the plug from the power point.
− Always pull out the power plug before:
* Relocating the machine.
* Cleaning or maintenance.
* Long periods of disuse.
− Never clamp or run the power cable over sharp corners or edges.
− Danger of electric shock! Damaged power cables may only be replaced at the customer service centre.
− Danger of electric shock! Never touch the power plug/socket/cable or the machine with damp or wet hands. Never unplug by pulling out the power cable; always remove the
plug.
− If you need an extension cable, make sure it is suitable for your machine (3-pole grounded,
1.5 mm2 conductor cross-section), and lay the cable to avoid tripping.
− Danger of scalding! Never move the machine during operation!
− Never operate the machine without water
− Always make sure there is water in water tank not less than minimum level.
− Danger of burning! Never touch very hot parts of the machine (e.g. brew unit during operations).