Installation guide

INSTALLATION
4
INSTALLATION
Mounting the Range Hood
1. Add and secure blockings (minimum 2x4
studs) onto ceiling joist.
2. Fasten mounting telescopic support frame
directly onto ceiling joist or stud
blockings.
3. Adjust height requirement and fasten
support frame.
4. Slip upper and lower telescopic duct
covers onto support. Fasten upper duct
cover piece.
5. Install duct work & electrical.
6. Install hood onto support frame & lower
duct cover onto hood (next page).
Add Blockings
Fasten Support Frame
Install Duct Cover
Fasten upper duct cover
Adjust height & fasten frame