Wine Cooler User Manual

15
Installation Instructions
Installing the Anti-tip Bracket
1. Position anti-tip bracket at a minimum of 8” from the left or right of the side of the
cooler.
2. Install anti-tip bracket to floor by using supplied 2” screws.
3. Push the cooler back into anti-tip bracket making sure the bracket overlaps the
cooler bottom.
Installing the Handle
1. Push aside the door gasket on the side
you wish to install the handle. Under the
gasket you will see two designated holes
for handle installation and pre-installed
screws.
2. Install the handle tightly as shown with
two screws, lock washers and flat washers
pre-installed.