Wine Cooler User Manual

14
Installation Instructions
Installation Clearance Requirements
When installing the wine cooler under a counter, follow the recommended spacing
dimensions shown.
⚫ If the cooler is flush-mounted with the front of the cabinets, an additional 1/8”
cabinet height clearance will be required.
⚫ For proper clearance of the electrical plug, allow at least 1” of clearance at the
back as shown in the diagram.
⚫ An installation next to a wall will require a minimum 2-1/4” door clearance to
accommodate the Zephyr handle. If a custom handle is used, the dimensions will
need to be measured accordingly based on the handle dimensions.
⚫ The cabinet should allow at least 24” for the width and 34” for the height to
accommodate the wine cooler.
⚫ The power cable is located on the back right of the unit and has a length of 72” to
accommodate multiple outlet locations.
⚫ Once you are ready to install the unit, you must adjust the feet to level the wine
cooler.
⚫ The installation should allow the unit to be pulled forward for servicing, if
necessary.