User Manual

REMOVING THE GLASS SHELVES:

1. Open the door completely.

2. Make sure the shelf is pushed back completely.

3. >ŝŌ either the leŌ or right side of the shelf to create a 45° angle from its original ƉŽƐŝƟŽŶ Make sure not

to ůŝŌ either side of the shelf too hard as it may come in contact with the inner wall mount.

4. Pull the shelf outward unƟl it is removed from the inner compartment. You may encounter some

resistance from the shelf guard rail.

Tip: To prevent damaging the door gasket, make sure to open the door fully before pulling the shelves out

of their track.

Note: The refrigerator may experience decreased cooling eĸciency if air ŇŽǁ is restricted due to a fully

loaded cabinet.

REMOVING THE WOODEN SLIDE SHELVES:

1. Open the door completely.

2. Remove all of the contents loaded on the shelf, if applicable.

3. Pull the shelf towards yourself ƵŶƟů it is fully extended outward.

4. The shelf has ƉůĂƐƟĐ posts on both sides as indicated in the diagram below. While facing the unit, press

the ƉůĂƐƟĐ post on the right side down while pulling up on the leŌ plasƟc post. You may choose to do this

by hand or by using a ŇĂƚŚead screwdriver.

5. Evenly pull out the shelf from the track ƵŶƟů it is completely removed from the inner compartment.