Manual

9
Warning: Allow at least 24 hours for your beverage cooler to run before storing your beverages and to
allow the temperature to acclimate. Whether your beverage cooler can reach the actual set
temperature depends on the ambient environmental condiƟons.
Internal Light
This cooler is equipped with side internal lights that can be set to Amber, Cloud White or Deep Blue
color. Because the unit comes with a glass door, the inside will be seen whether the door is open or closed.
You can choose to display each color of light in two ĚŝīĞƌent modes: Display DŽĚĞĂŶĚƵƚŽŵĂƟĐDŽĚĞ
Display Mode
The internal lights will stay constantly illuminated whether the door is open or closed.
AutoŵĂƟĐ Mode
The internal lights will illuminate eacŚƟŵĞthe door is opened and fadeŽīŽŶĐĞƚŚe door is closed. This
feature is triggered by a sensor located on the front vent. This sensor allows the cooler to recognize
when the door is open or closed.
To change to between Display DŽĚĞĂŶĚƵƚŽŵĂƟĐDŽĚe, press and hold Light bƵƩŽŶ for 3 seconds.
Note: Pressing and holding the increase and decrease temperatureďƵƩoŶƐĂƚƚŚĞƐĂŵĞƟŵe will switch the
temperature display from °F to °C.
Tip: If you powered the unit oīƉůĞĂƐe wait at leaƐƚĮve (5) minutes before powering it back on.
Note: We run test every unit that we produce in our factory. Because of this, your model may default to
any of the abovĞƐĞƫŶŐƐŽƵƚŽĨthe box. Simply cycle through the progression of seƫŶŐƐuŶƟůLJou reach
your desired light ƐĞƫŶŐ.
Tip: Close the door to determine if the light is currently in Display Mode oƌƵƚŽŵĂƟc Mode. In Display
Mode the lights will remain on, ĂŶĚŝŶƵƚŽŵĂƟĐDŽĚĞƚŚĞůŝŐŚƚƐǁŝůůĨĂĚĞŽī once the door is closed.
Note:
/ĨĚŽŽƌŝƐůĞŌĂũĂƌĨŽƌĂƉĞƌŝŽĚŽĨ;ϯͿŵŝŶƵƚĞƐŽƌŵŽƌĞƚŚĞƵŶŝƚĚŽŽƌĂũĂƌĂůĂƌŵǁŝůůďĞĞƉƵŶƟůĚŽŽƌŝƐ
closed.
Note:
dŚĞĞǀĞƌĂŐĞŽŽůĞƌŝƐĞƋƵŝƉƉĞĚǁŝƚŚĂƚĞŵƉĞƌĂƚƵƌĞŵĞŵŽƌLJĨƵŶĐƟŽŶ/ĨƉŽǁĞƌŝƐƐƵĚĚĞŶůLJůŽƐƚƚŚĞ
ƉƌĞǀŝŽƵƐůLJƐĞƚƚĞŵƉĞƌĂƚƵƌĞǁŝůůďĞƐĂǀĞĚĂŶĚƚŚĞƌĞĨƌŝŐĞƌĂƚŽƌǁŝůůƌĞƚƵƌŶƚŽƚŚŝƐƐĞƫŶŐŽŶĐĞƉŽǁĞƌ
is restored.
Note:
If the interior temperature is higher than 73°F (23°C), “HI” is shown on the display panel and the
ďƵnjnjĞƌĂůĂƌŵƐŽƵŶĚƐĐŽŶƟŶƵŽƵƐůLJĂŌĞƌŽŶĞŚŽƵƌdŚŝƐŝŶĚŝĐĂƚĞƐƚŚĂƚƚŚĞŝŶŶĞƌƚĞŵƉĞƌĂƚƵƌĞŝƐƚŽŽ
high, and you should look for the reason. If the inner temperature is lower than 32°F (0°C), “LO” is
ƐŚŽǁŶŽŶƚŚĞĚŝƐƉůĂLJƉĂŶĞůƚŚĞĂůĂƌŵĂŶĚƚŚĞŵĂůĨƵŶĐƟŽŶŝŶĚŝĐĂƚŽƌůŝŐŚƚŐŽŽŶĂƚƚŚĞƐĂŵĞƟŵĞ