Use and Care Manual

19
PRB24C01AS-OD Use, Care, and Installation Guide
ZEPHYRONLINE.COM
Installation Instructions
Reversing the Door Swing of Your Appliance
Should you desire to reverse the opening direction of the door, please follow the instructions below.
Safely reversing the door swing of your appliance should require at least two people.
1
1
2
3
1011
1
1
2
1
3
1
4
1
5
4
5
6
7
8
9
12
1. Take out the 2 screws from the lower door axis
(1), remove the door (2), and the axis plate (1)
from the door.
2. Take out the 3 hinge screws from the top right
hinge (3) and remove it.
3. All located at the bottom of the door, unscrew
2 screws and remove the door magnet (4),
unscrew 2 screws and remove the door stopper
(5) and the stopper film (6), unscrew 2 screws
and remove the child safety lock (7), and
remove the Zephyr logo (8). Then, install the
door magnet, child safety lock, stopper film,
and new door stopper (9) on the opposite side
of the door frame. Rotate the door 180 degrees
and install the Zephyr logo at the top of the
door.
4. Remove the grey decorative nails (10) from
the top left of the cabinet. Install the grey
decorative nails to the top right of the
cabinet and install the new top hinge (11)
from the hardware package that includes
the installation manual at the top left of the
cabinet with 3 screws.
5. Install the lower door axis (12) and install the
door once correctly aligned.