Use, Care, and Installation Guide www.zephyronline.com PRB24C01AG Presrv Beverage Cooler JAN18.
Important Safety InformaƟon Improper handling can cause serious damage to the Zephyr beverage refrigerator and/or injury to the user. This beverage refrigerator is designed for domeƐƟc indoor use only. Do not use the unit for industrial or commercial use. Any other use may invalidate the warranty. Please review the raƟng label located on the rear panel of the unit for electrical and other technical data related to this unit. The unit must be used in a properly grounded wall outlet.
GENERAL SAFETY To prevent back and other types of injuries, use at least two people to move and install the beverage refrigerator. This appliance is not intended for use by persons, including children, with reduced physical, sensory, or mental es, unless they have been given supervision or instr concerning the use of the appliance by the person(s) responsible for their safety. Install the beverage refrigerator in a well ve ed area where the ambient temperature is above 50° F and below 90° F.
Table of Contents Important Safety InformaƟŽŶ………………………………………………………………………………………………………………………………………. ii Table of Contents…………………………………………………………………………………………………………………………………………………………. iv First Time KƉĞƌĂƟŶŐ InstrucƟŽŶƐ͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙͙.v IntroducƟŽn…………………………………………………………………………………………………………………………………………………………………. 1 Parts IdenƟĮĐĂƟŽn & Dimensions……………………………………………………………………………………………………………………………….
First Time OperĂƟŶŐ /ŶƐƚrucƟŽŶƐ͗ Before use, make sure all packaging labels and materials are removed from the unit. Be sure to keep track of all included parts and pieces before discarding packaging materials. It is advised that you keep the original box and packaging materials in case you need to move or ship the appliance in the future. Allow the unit to stand for at least 24 hours before you use it; this allows the cooling components ƟŵĞ to ƐĞƩůĞ from transit.
Introduction Thank you for purchasing your Zephyr beverage refrigerator. Zephyr is dedicated to developing products that will enhance your lifestyle with superior quality and distinctive features. Please visit www.zephyronline.com for more information on your product and other Zephyr products. This manual contains important information regarding the proper installation, use, and maintenance of your beverage refrigerator.
Parts /ĚĞŶƟĮĐĂƟŽŶ Θ ŝŵĞŶƐŝŽŶƐ ^ĞĂŵůĞƐƐ ^ƚĂŝŶůĞƐƐ ŽŽƌ Carbon Filter ZŽůůͲKƵƚ ^ŚĞůĨ Internal Fan Door Handle Glass Shelf Sensor Front vent >ĞǀĞůŝŶŐ >ĞŐƐ 25-9/16” 23-5/8” 21-7/8” 24-1/8” 23-7/8” 2 30-1/8” 23-5/8” 33-7/8” 24-1/2” 34-7/16” Side View 46-3/8” Top View
Carbon Filter A built-in carbon Įůƚer protects your beverages by acƟŶŐ as a natural barrier against harmful odors. Internal Fan This is an air-cooled unit equipped with an internal fan that maintains a consistent internal temperature. Note: The carbon Įůƚer should be replaced every 3-6 months depending on the unit’s exposure level to odor. If the unit is placed in a kitchen, regular replacement every three (3) months is ideal.
TYPES OF INSTALLATION: This beverage refrigerator has been designed for free-standing or built-in ŝŶƐƚĂůůĂƟŽŶ͘ In every case, there must be adequate ǀĞŶƟůĂƟŽŶ and access for service͘ Free-standing /ŶƐƚĂůůĂƟŽŶ A free-standing ŝŶƐƚĂůůĂƟŽŶ will allow you to install the beverage refrigerator in almost any place you desire͘ You must follow the stated instrucƟŽŶs for electrical requirements and leveling the beverage ƌĞĨƌŝŐĞƌĂƚŽƌ͘ Built-in /ŶƐƚĂůůĂƟŽŶ A recessed installaƟon will allow you to install the beverage
LEVELING: The beverage refrigerator should be installed on a firm and level surface that will be able to support the entire weight of a fully loaded unit. It is important for the beverage refrigerator to be leveled in order to work properly. It can be raised or lowered by rotating the plastic sheaths around each of the feet on the bottom of the machine. If you find that the surface is not level, rotate the feet until the beverage refrigerator becomes level.
REMOVING THE GLASS SHELVES: 1. Open the door completely. 2. Make sure the shelf is pushed back completely. 3. >ŝŌ either the leŌ or right side of the shelf to create a 45° angle from its original ƉŽƐŝƟŽŶ͘ Make sure not to ůŝŌ either side of the shelf too hard as it may come in contact with the inner wall mount. 4. Pull the shelf outward unƟl it is removed from the inner compartment. You may encounter some resistance from the shelf guard rail. REMOVING THE WOODEN SLIDE SHELF: 1. 2. 3. 4.
Reversing Door Handle Placement REVERSING THE DOOR: A. Open the door to a 90 degree angle, take out the 2 screws from the lower door axis (2), remove the door (3) and the axis plate from the door. B. Take out the 3 hinge screws from the top right hinge (4) and remove it. C. hŶƐĐƌĞǁ Ϯ ƐĐƌĞǁƐ Ăƚ ƚŚĞ ďŽƩŽŵ ŽĨ ƚŚĞ ĚŽŽƌ ĂŶĚ ƌĞŵŽǀĞ ƚŚĞ ZĞĞĚ ƐǁŝƚĐŚ ;ϲͿ͕ ƚŚĞŶ ŝŶƐƚĂůů ƚŚĞ ZĞĞĚ ƐǁŝƚĐŚ at the top of the door frame. D.
KƉĞƌĂƟŽŶ INSTALLATION CHECK-LIST BEFORE OPERATION: 1. Have all pacŬŝŶŐ ŵĂƚĞriaůƐ ĂŶĚ ƚĂƉĞ ďĞeŶ ƌeŵŽǀĞĚ ĨƌŽŵ ƚŚĞ ŝŶƚĞrŝŽƌ ĂŶĚ ĞdžƚĞƌŝŽƌ ŽĨ ƚŚĞ ďĞǀĞraŐe reĨƌŝŐeƌĂƚŽƌ? 2. HaǀĞ ƚŚĞ ŝŶsƚĂůůĂƟŽŶ ŝŶƐƚƌƵĐƟŽŶƐ ďĞeŶ ĨŽůlŽǁĞĚ͕ iŶĐůƵĚŝŶŐ ĐŽŶŶĞcƟŶŐ ƚŚe ŵĂcŚŝŶĞ ƚŽ ĞůeĐƚriciƚy? 3. HĂƐ ƉƌŽƉĞƌ ŐƌŽƵŶĚŝŶŐ ďeeŶ ŝŶƐƚĂůůeĚ ĨŽƌ ƚŚĞ ďĞǀĞrĂŐĞ rĞĨriŐĞƌaƚŽƌ? 4. HaƐ ƚŚĞ ŵĂĐŚŝŶĞ ďĞĞŶ ůĞveleĚ͍ 5. Is ƚŚĞ ďĞǀĞrĂŐĞ reĨƌŝŐĞƌĂƚŽr ŝŶ Ă ƐŝƚĞ ǁŚĞƌe ƚŚĞ aŵďŝĞŶƚ ƚeŵperĂƚƵrĞ ŝƐ ďĞƚǁeĞŶ ϱ0° & ĂŶĚ ϵ0° F all year ƌŽƵŶĚ͍ 6.
Note: Pressing and holding the increase and decrease temperature ďƵƩoŶƐ Ăƚ ƚŚĞ ƐĂŵĞ Ɵŵe will switch the temperature display from °F to °C. Tip: If you powered the unit oī͕ ƉůĞĂƐe wait at leaƐƚ Įve (5) minutes before powering it back on. Warning: Allow at least 24 hours for your beverage refrigerator to run before storing your beverages and to allow the temperature to acclimate. Whether your beverage refrigerator can reach the actual set temperature depends on the ambient environmental condiƟons.
ĞĨƌŽƐƟŶŐ Note that ƵŶĚĞƌ most ƌĞĨƌŝŐĞƌĂƟŶŐ ƐĞƫŶŐƐ͕ the ƵŶŝƚ will ĂƵƚŽŵĂƟĐĂůůLJ Ěefrost ƵŶĚĞƌ most ambieŶƚ ĐŽŶĚŝƟŽŶƐ͘ However͕ oŶ ĐŽůĚer seƫŶŐƐ͕ some frost maLJ ďƵŝůĚ ƵƉ͘ ĚĚŝƟŽŶĂůůLJ͕ the more ŚƵŵŝĚ the ambieŶƚ ĐŽŶĚŝƟŽŶƐ͕ the more frost maLJ ďƵŝůĚ ƵƉ͘ Keep the ĚŽŽr ĐůŽƐeĚ as muĐh as possible ĂŶĚ avoiĚ ŽƉĞŶŝŶŐ the ĚŽŽr ƵŶŶeĐeƐƐĂƌŝůLJ to ŵŝŶŝŵŝnjĞ frost ďƵŝůĚ-ƵƉ͘ If frost is ƉƌĞǀĞŶƟŶŐ the ĚŽŽr from ĐlosŝŶŐ properůLJ͕ LJŽƵ maLJ ŶeeĚ to power the ƵŶŝƚ oī ƵŶƟů the frost ŵĞůƚƐ͘ Use a soŌ absorbeŶƚ towel to ĚƌLJ the ƵŶŝƚ͘
Preparing Your Beverage Refrigerator for Storage If the beverage refrigerator will not be used for a long Ɵme, or is to be moved to another place, it will be necessary to defrost the unit and dry the interior. 1. Disconnect the refrigerator from the power supply by removing the power plug from the wall socket. 2. Leave the door open to allow for air circulaƟŽŶ and to prevent mold, mildew, and unpleasant smells. 3. Once the interior is dry and clean the unit will be ready for storage.
ISSUE The beverage refrigerator will not reach the desired temperature. POSSIBLE CAUSE The refrigerator has restricted air ŇŽw due to too much storage. The refrigerator is placed too close to a heat source. The refrigerator does not have ƐƵĸĐŝĞŶƚ ǀĞŶƟůĂƟŽŶ͘ The door is opened too frequently or for long periods of Ɵme. The beverage refrigerator is making strange noises. Certain sounds are normal The unit is not level or is touching another appliance. The body of the beverage refrigerator is electrŝĮed.
^ƉĞĐŝĮĐĂƟŽŶƐ DESCRIPTION OF PRODUCT Built-IŶ BeverĂŐĞ ŽŽůer MODEL PRB24C01AG VOLTAGE / FREQUENCY AC 115 / 60 Hz AMPERAGE 1.5 A INPUT POWER 120 W COLOR BlĂĐk ĂďŝŶet with ^ƚĂŝŶleƐƐ Steel ŽŽr STORAGE CAPACITY 110 ĂŶƐΎ͕ ϴ ďŽƩůĞƐ REFRIGERANT ZϲϬϬĂ͕ 1.4 Žnj.
Limited Warranty Zephyr Ventilation, LLC (referred to herein as “we” or “us”) warrants to the original consumer purchaser (referred to herein as “you” or “your”) of Zephyr products (the “Products”) that such Products will be free from defects in materials or workmanship as follows: Five Year Limited Warranty for Compressor: For five years from the date of your original purchase of the Products, we will provide, free of charge, compressor parts to replace those that failed due to manufacturing defects subjec
